बीएस बॉन्डस्मार्ट टाइल चिपकने वाला

उत्पाद वर्णन

This technical mortar is suggested to be used after adding water to make a high thixotropic mortar paste, to be used for bonding blocks such as AAC Blocks or aerated light weight concrete blocks, fly ash blocks, concrete hollow blocks, cellular light weight concrete blocks, earthen bricks or levelling out the brick work surface with paste thickness upto 12mm.

Advantages of BS BondSmart

1. No curing required

2. Higher Strength then ordinary mortars

3. Good flexural strength to resist natural vibrations

4. Perfect adhesion for all kinds of masonry blocks

5. Thinner joint possible with improved adhesion

6. Easy Use

7. Longer working time for hotter climates

8. Application is fast & economical

Consumption of BS BondSmart

Consumption is based on finish of surface of thesubstrate, dimension of blocks and the thickness of pasteapplied. Following is an estimated coverage of BSBondSmart mortar when blended with 30% Water.

Application tips for BS BondSmart

Surface Preparation

1. When applying the substrate should not beabove 33 C degree & below 4 degree C

2. Rough or uneven concrete surfaces should bemade smooth with polymerized mortar of BSSmartbond @4% of cement added to equal partsSand & Cement & Water.

3. Application can be done on a moist surface, alsomake sure surface is plumb and levelled.

Mixing of BS BondSmart

1. Mix 9 to 10 Kg of potable water to 30 Kg bag ofBS BondSmart Block Adhesive for making the thinbed block bonding adhesive mortar

2. Add powder slowly to water in the bucket andslowly mix by hand or slow speed mixingmachine.

3. Mix for 4 to 5 minutes until a smooth lumpfree paste is formed